dehazeclose
search
arrow_back_iosSearch
search

AC Clamp Meter with BLE 4.1 – AC power

ID: 3EGN005Editor’s PickOff-The-ShelfEnd-product
Location: Taipei, Taiwan
This device is self-rechargeable, and the split core permits non-contact current measurements through magnetic field induction without disconnecting the cable circuit. BLE4.1 enables real-time monitoring for appliance electricity and hazardous conditions.
Wireless: Bluetooth(4.1)
Power: AC(Regularly AC current)
Sensors: Temp(-20~85 ℃)
Certification: UL(94-V0)
Dimension: 43.5 mm (L) x 38.6 mm (W) x 85 mm (H)
Material: Plastic (PC, ABS, ABS+PC, Carbon fiber), Aluminum/Alloy
Product Weight: 150 grams
Contact supplier for quote
for Off-The-Shelf solution
Description
Specification
Supplier Info

BLE4.1 AC Clamp Meter – CM03-01

Description

CM03-01 wireless BLE Clamp Meter is self-rechargeable and with no need to replace the battery. The split core design permits non-contact current measurements through magnetic field induction without disconnecting cable circuit for CT installation. This method permits a safer, easier and portable current measurement, which enables you to DIY without touching your plug that provides reliable wireless data communication over BLE4.1 network. It does real-time monitoring for your appliance electricity usage on smart phone and professional diagnosis to alert you under hazardous condition.

 

 

 

   

 

Features

l  Built-in circuit protection from over voltage even secondary circuit open

l  Compact size works up to 250A AC

l  Applicable for power saving facilities and overload protection systems

l  Isolated plastic case recognized according to UL 94-V0

l  Bluetooth v4.1 compliant protocol stack for single-mode BLE solution

l  Dimension: 43.5mm x 38.6mm x 85.0mm ( L x W x H )

l  Electrical lines and equipment of current measurement and protection

l  Measures AC current flow to electric motors, lighting, air condition equipment, etc .

l  Built-in Temperature Sensor

l  Self-rechargeable without replacing battery

 

 

 

Specifications

l  Measure Current Range 2A ~ 250A RMS AC (50/60Hz)

l  Max. measure voltage AC 600V

l  Application frequency 50/60KHz

l  Accuracy 10A ~ 250A +_1%

l  Accuracy of the Linearity CLASS 1.0 , RL 10Ω

l  Conductor Hole Ø 24mm

l  Insulation Resistance > 100MΩ at 500V

l  Enclosure Material NYLON Flame Retardant (UL-94V0)

l  2.4GHz Bluetooth low energy compliant and proprietary RF system on-module

l  Excellent Receiver Sensitivity –97 dBm

l  Temperature Sensor : Rang -20~85 , Accuracy +- 4

l  Bluetooth v4.1 compliant protocol stack for single-mode BLE solution

l  Weight approx. 150 g

l  Operating Condition -20 ~50, below 80% R.H. no condensation

l  Storage Condition -30 ~70, below 70% R.H. no condensation

l  Warranty: 1 year

l  Usage condition: Regularly AC current >1A

 

Function Specifications

  • Wireless: Bluetooth(4.1)
  • Power: AC(Regularly AC current)
  • Sensors: Temp(-20~85 ℃)

Certification

UL(94-V0)

Enclosure

  • Dimension: 43.5 mm (L) x 38.6 mm (W) x 85 mm (H)
  • Material: Plastic (PC, ABS, ABS+PC, Carbon fiber), Aluminum/Alloy
  • Product Weight: 150 grams
AC Clamp Meter with BLE 4.1 – AC power
Location:Taipei, Taiwan
Contact supplier for quote
Contact supplier for quote