BLE Bluetooth Transceiver Module

The Bluetooth 4.0 BLE for Arduino, Raspberry Pi, STM32 (Master/Slave and iBeacon) integrates a Serial Bluetooth BLE module. It can be easily used with Arduino, Raspberry Pi for transparent wireless serial communication. You can choose two pins from Arduino D0 to D7 as Software Serial Ports to communicate with Bluetooth Shield (D0 and D1 are Hardware Serial Port). Support Central and Peripheral mode switch, modify by AT command. Support Remote control mode, the remote device can control PIO pin or modify settings by AT commander when Connected. (such as Iphone4s/5/6 iPad, Note2, etc.) The Bluetooth UART serial Converter Module can easily transfer the UART data through the wireless Bluetooth. without complex PCB layout or deep knowledge in the Bluetooth software stack, you can combine this Bluetooth module with your system: MCU, ARM or DSP systems, SOC systems, Personal Digital Assistants (PDAs),  Computer Accessories, and  Other systems you want to use under Bluetooth functions. Device Features nordic 51822 Bluetooth Chip Solution Fully Qualified Bluetooth V4.0 Ble Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support Incredibly small size with 3.3V input, and RoHS Compliant UART interface and with baud rate setup function iBeacon Size: 28*13*2.3mm,

Features

- Frequency Range: 2402~2480MHz

- UART Data Interface

- Sensitivity: -93dBm

- Output Power: ≥3dBm

- AES-128 Encryption and Decryption

- Self-adaptable frequency hopping

- Different power-saving modes

- Four types of pairing mechanism

- Supply voltage: 3.0~5.0V

Guides and Supports

For open course sample code, down from: https://github.com/iFrogLab/iFrogLab_F-60_UART